$164.00 - $169.00
Cane Creek's Thudbuster Seatpost adds comfort to any hardtail bike. Using a parallel-linkage design, the Thudbuster moves down and back at the same rate as the rear wheel moves forward and up when you hit a bump, helping you maintain control. The post and linkage is made of aluminum with Teflon coated steel bushings so you know it's built to last. And, the interchangeable elastomers (sold separately) can be easily exchanged to your preferences.
Zipp's Service Course Seatpost is stiff, light, has excellent gripping power, and the low-profile clamp allows you to slide the saddle extra far back on the rails. The shaft and head are 3D forged from a single piece of light, tough 7075 aluminum, and the clamp even features downward-facing bolts for micro-adjustments to achieve that perfect fit.
Strong, yet light as a whisper, Zipp's Service Course SL is everything you could want in a seatpost. It's forged out of a single piece of tough 7075 aluminum, yet weighs just 220 grams. A low-profile clamp allows you to slide the saddle extra far back on the rails, giving you more room to optimize your position. The clamp even features downward-facing bolts for micro-adjustments to achieve that perfect fit.
Zipp's SL Speed Seatpost has become a favorite of pro road and cyclocross racers because of its light weight and dependability. - Titanium hardware; black, red and white nut retainers included - Minimum insertion length is 100mm - Dual-bolt, low-profile micro-adjust cradle - UD carbon post, head, and clamps
X-Fusion's Hilo Strate dropper seatpost is a no-nonsense post with air spring and hydraulic lockout. The internal cable routing keeps your bike's appearance clean and simple while keeping the cable out of harm's way. The BAT activation remote with uni-directional lever can be mounted on the left or right, above or below the handlebars. - Double key-way design prevents lateral twisting - Double bolt clamp with wide range of seat angle adjustment - Seat clamp fits both standard and 7 x 9 mm Carbon Rails - Cable activated, hydraulic action, infinitely adjustable travel - Weight: 530g - Remote Position: Left or Right - Cable Routing: Internal - 2-year warranty
X-Fusion's Manic dropper seatpost uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames and to increase usable travel. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Paddle shifter style remote with adjustable angle ball-joint handlebar clamp - Sealed cartridge internals for quick replacement - Double key-way design prevents lateral twisting - Low-profile head-seal and saddle clamp increase useable travel - Cable activated, hydraulic action, infinitely adjustable travel - Double bolt clamp with wide range of seat angle adjustment - Weight: 610g - Remote Position: Left or Right - Cable Routing: Internal - Insertion Depth: 285mm
Trek-compatible seat mast cap Offered in white and black and a variety of lengths and offsets, the mast cap includes hardware compatible with round saddle rails only. 7x10mm carbon rail-compatible hardware sold separately. Key features: - Ultra-light carbon construction - One bolt head design offers easy fore-aft and infinite angle adjustment - Compatible with all Trek road bikes with round seat masts - 175mm and 135mm lengths - 5mm and 20mm offsets - Aluminum clamp
• Aluminum • Coil spring provides plush suspension • Adjustable pre-load design • Micro-adjust seat clamp • 450 grams
- Forged aluminum - 7/8-inch seat-clamp diameter - 165 grams
$19.95 - $24.95
• Forged aluminum • Integrated micro-adjust seat clamp
- Chrome - Sold individually
• Aluminum • Coil spring suspension • Adjustable pre-load design • Collar adjustment for play removal • 7/8-inch seat-clamp diameter
$5.99 - $15.00
• Steel • Polished-chrome finish • 7/8-inch seat-clamp diameter
$12.99 - $15.99
• Unicycle-specific seatpost
On leg-burning climbs, crazy fast descents and rolling technical terrain, RockShox's Reverb dropper post enables you to attack the trails like never before. Just hit the hydraulic remote lever for 100–125mm of infinitely adjustable up-and-down saddle movement without ever slowing down! The return speed is easily adjustable by turning a dial on the remote while the triple-lipped sealing system and sealed hydraulic hose keep dirt out for clean, consistent operation. There's also an included collar that limits travel to a preferred height setting. So go ahead and drop your seat a couple of inches for that 30-foot technical section, raise it for that long climb then lower it all the way and get back for that steep descent, without losing your flow.
New Guts, New Glory Don’t let its familiar good looks fool you—Reverb is a whole new weapon. Its internals have been completely re-engineered to improve on its already legendary performance and to offer enhanced reliability: all the smallest details, down to the single seal, have been re-evaluated and updated to pass the hardest and longest durability tests. Additional bushing overlap also improves performance over time, while new 150- and 170-millimeter travel options are available to tame even the gnarliest of descents. This is the brand-new Reverb, engineered for the next-generation mountain biker. - Completely redesigned internals with new SKF internal floating piston - Improved performance and durability in all conditions - 150mm and 170mm travel options available in all diameters - Increased bushing overlap - New dedicated post length per travel length - WEIGHT: 560g (weight based on 340mm post, 30.9mm diameter, 100mm travel, MMX remote with shifter hardware and 1300mm hose) - LENGTH: 340mm, 390mm, 440mm, 480mm - COLORS: Black - MATERIAL: Shaft: 3D forged 7050 alloy , Head: 7050 forged alloy - OTHER: Zero Offset , Remote: Adjustable return speed at the handlebar, Discrete or Match Maker X, Left or right - AVAILABLE IN: Travel: 100/125/150/170mm ; Diameter: 30.9/31.6/34.9mm
The RockShox Reverb 1x remote pairs the ergonomics of SRAM’s shifter design and low-lever-force hydraulic actuation to the internally routed Reverb Stealth B1 so riders can use their Reverb posts quicker, more easily and often, for better ride control on the trail. Reverb's 1x Remote’s Bleeding Edge fitting makes bleeding quick and simple, with an updated fluid path and bleed porting to make it easier to push fluid through the system, and a dedicated bleed adapter that plugs into the bleed port and seals the system to minimize air contamination and fluid loss - Adjustable return speed by turning the collar on the remote - MatchMaker X or discrete clamp options included - 2000mm hose length - Adjustment: Infinite - Remote Position: Left
- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset
$379.00 - $379.99
Introducing the Turbine Dropper Post: A patented hybrid design that couples mechanical and hydraulic locking technologies, inspired by MTB disc brakes. The rider's body weight is supported with a mechanical lock; meaning a solid connection and less potential for failure over time. Lower air pressures and static seals offer unrivaled performance, control, and reliability. Turbine also operates in below-freezing temperatures making it perfect for Fat Bikes and cold weather riding. Less down time for service equals more saddle time on the trails. - Internal cable routing - Infinite-adjust within stroke - Race Face proven Hunter Head 2-bolt design - Quick Connector allows easy, tool-free disconnection - Remote uses standard shifter cable and housing - Functions at full capacity in below-freezing conditions (i.e. suitable for Fat Bikes & winter riding) - 1x Front shifter style hop-up lever available in Black, Red, Blue, Green, Orange
- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio - Race Face's triple butting design maintains strength in critical areas while reducing overall weight - The tube is anodized & shot peened for increased fatigue life - Updated Hunter head design for easy saddle installation and full adjustability - 3D forged from 2014 heat treated aluminum with triple butted mast - Thumbscrew tightening system allows quick dial-in of the saddle angle by hand - Angled clamp bolts allow easy tool access for hassle free adjustment - Rubber grommet seals the post to prevent water from entering seat tube - Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)
Origin-8's Compe-Lite Black-Series Seat Post is crafted from light, durable, anodized 6000 aluminum. It has a single-bolt adjustable clamp for easy seat installation and fine-tuning.
Choose from the many colors and add style to your ride with Origin-8's Compe-Lite Seat Post. It's crafted from light and durable 6000 aluminum, and features a single-bolt adjustable clamp for easy seat installation and fine-tuning.
$26.99 - $34.95
Origin-8's Pro Fit Alloy Seat Post is made of light and durable forged aluminum that's been anodized and laser etched for a custom look. It also features an adjustable 2-bolt clamp that holds fast and lets you easily dial in your seat position. And, this fine post comes in a variety of diameters to fit almost any bike.
Origin-8's Pro Fit II Black-Series Seat Post is made of light and durable forged 6000 aluminum that has Origin-8's Blast Black finish for a custom look. It also features an adjustable 2-bolt clamp that holds fast and lets you easily dial in your seat position.
• Forged alloy construction • Single top bolt adjustment
- 6061-T6 construction w/forged alloy head - 45mm adjustable preload suspension travel - 2-Bolt Zero Offset head clamp - Up to 300 lb rider weight - EN MTN safety approval - 385g (27.2mm x 350mm)
3D forged one-piece AL7050-T6 construction - Wide saddle clamp design reduces rail stress and flex - Micro-adjust 2 bolt clamp design - 15mm setback - ISO-Mountain safety certified
3D forged one-piece AL6061-T6 construction - Wide saddle clamp design reduces rail stress and flex - Micro-adjust 2 bolt clamp design - 15mm setback - ISO-Mountain safety certified
Introducing the Highline: years of research, development, and rigorous testing has given rise to the world's finest dropper post and remote. Premium sealing, exclusive Igus bearing and keys, Jagwire cable, and a self-contained hydraulic cartridge deliver industry leading quality and reliability. The Highline features the world's most ergonomic remote: unique spherical adjustment, with near-infinite rotation and tilt customization options, for perfect cockpit ergonomics. Specs: Setback: Zero Length: 345mm/ 400mm/ 465mm Material: 7075-T6 aluminum Minimum Stack height: 47mm Weight: 525g (100mm)/ 560g (125mm)/ 610g (160mm) Warranty: 3 years
$24.99 - $29.95
- Straight-gauge 6061-T6 alloy shaft construction - 2-bolt rocker-head with micro-adjustment - Suitable for road or mountain use
Page 1 of 2 Next page